Fiberglass Hot Tub Owners...click here
and you will be transferred
to the page that specializes in
fiberglass hot tubs and
swimming pools.
Wood
Hot Tub Repair and Refinishing

Do-it-yourself DIY and save thousands
of dollars!
Does your hot tub need help?
Is it starting to show its age?
We
can help you repair and restore your older wood
hot tub. Our Fibre-Shelkote products are
formulated specifically for swimming pools, hot
tubs, and spas. We will help you do it yourself
DIY with our toll free telephone support
at 800-676-8528 that is guaranteed available
7 days a week, 360 days a year.
The
entire process is easy and inexpensive, plus
you can do it yourself, so you'll know it's
done right. When you're finished, it will be as
good as brand new. After the surface is prepped,
the entire process can be completed by one person
in one day!
Wood hot
tubs require more effort to restore than fiberglass,
but you can permanently stop leaks and make your
hot tub look better than when it was brand new.
Your hot
tub will be the mold for your new fiberglass shell
with a life expectancy of 30 years, although
the finish coat of gel coat will need to be replaced
in 10-15 years depending upon chemical usage and
water temperature.
|
For long life
of the gel coat finish coat, 12 years
& longer, always turn temperature down
when not in use.
|
From Palm Desert, CA...one
customer's remarks:
Hi Bill,
Just wanted to report back. I am extremely satisfied
with the results of the new gel coat to my old fiberglass
spa. I had it sandblasted as you suggested.
Cost me $400. Your product $300 and looks like
a new pool....
If you are working alone, don't try to paint
on more than one gallon at a time. I tried two and
about half got hard before I had time to get it
down.
Anyway, thanks for your website and a new pool!
Your product worked just as you advertised. You
shipped it from Pennsylvania to California in less
than a week! I would have sent you pics as your
e-mail suggested, but alas, I had already sandblasted
before I knew that you wanted them. You might want
to put the offer in your website instead of the
e-mail on how to apply the product. I'll send you
a pic when I finish and have the stonework and waterfall
completed, anyway.
Jerry Wheeler, Palm Desert, CA
More hot tub photos and information are on our other site,
which is dedicated to fiberglass pools and hot tubs.
Always wear goggles
and a mask when sanding. Wear gloves and a mask
when using solvent, gel coat, and putty. Be sure
to choose a mask appropriate for the task. gel coat
must be stored away from direct sunlight and the
gel coat and pool surface temperature must be between
60° and 95° when
used. Surface temperatures exceeding 95° require special assistance. Please call
our corporate headquarters.
Shelf life is 6 months.
Toll
Free: 800-676-8528
Call 7 days a week Mon - Fri 10AM - 6PM EST
Saturday & Sunday 10AM - 4PM
(January 15th thru November
30) except Easter Sunday
Pool Resurfacing, Inc.
332 Bustleton Pike
Feasterville Trevose, PA 19053
|